Premium

Cell efficiency increase of 0.4% through light-induced plating

Facebook
Twitter
LinkedIn
Reddit
Email

By Andrew Fioramonti, Global Solar Product Manager, Technics, Inc.

A vast majority of silicon solar cells are manufactured using silver paste that is screen printed onto the front side of the wafer and fired to form the front-side contact. Though this method is well established within the industry, it continues to present several areas for potential efficiency improvements. The Fraunhofer Institute [1] has, among others, studied the potential of using electrodeposition of silver on top of the front side silver paste as a way to improve the front-side contact and increase cell efficiency. These results have shown cell efficiency increases of up to 0.4% absolute. This type of improvement has captured the interest of many manufacturers, but there has been a hesitancy to adopt electrodeposition as there is uncertainty as to what they can expect on their cells. Since efficiency gains are dependent upon many factors that can be unique to an individual cell, this paper provides a much-needed exploration of the potential effects of electrodeposition of silver in a way that isolates its effects from that of other factors.

Published In

Premium
The second edition of Photovoltaics International was published in November 2008. It includes the cost benefits of conversion of used 200mm semiconductor fabs for the PV industry by CH2M Hill in Fab & Facilities, in-line plasma-chemical etching from Fraunhofer IWS in Cell Processing and NREL presents design criteria for back- and front-sheet materials in PV Modules.

Read Next

Subscribe to Newsletter

Upcoming Events

Solar Media Events
July 2, 2024
Athens, Greece
Solar Media Events
July 9, 2024
Sands Expo and Convention Centre, Singapore
Upcoming Webinars
July 10, 2024
9am (BST) / 10am (CEST)
Solar Media Events
September 24, 2024
Warsaw, Poland
Solar Media Events
September 24, 2024
Singapore, Asia